Changeset 132

Timestamp:

01/21/08 01:44:00 (11 months ago)

Author:

follower

Message:

Quick commit of code to program sketch onto another ATMega chip.

Files:

• branches/follower/wiz810mj/src/demo/WizDemo6/WizDemo6.pde (modified) (4 diffs)

branches/follower/wiz810mj/src/demo/WizDemo6/WizDemo6.pde

@@ -691 +691 @@
 
 void setup () {
-  Serial.begin(9600);
-  Serial.println("Setup enter...");
-
-  Serial.println("Start W5100 configuration...");
+  // Serial.begin(9600);
+  Serial.begin(19200);
+  ///Serial.println("Setup enter...");
+
+  ///Serial.println("Start W5100 configuration...");
   
   SPI.begin();    
@@ -707 +708 @@
   Network.device.setGateway(192,168,2,101);
    
-  Serial.println("End W5100 configuration...");
+  ///Serial.println("End W5100 configuration...");
 
   pinMode(PIN_LED, OUTPUT);
   digitalWrite(PIN_LED, HIGH);
   
-  Serial.println("Setup exit...");
+  ///Serial.println("Setup exit...");
 
   // Serial.println(((analogRead(2)*70)/630)/10+'0', BYTE);
 
 /**/
-  Serial.println("Test sockets...");
-
+  ///Serial.println("Test sockets...");
+
+  NetworkConnection conn = Network.listen(7);
+
+  ///Serial.println("Waiting for connection...");
+
+  while (!conn.isConnected()) {
+    //Serial.print(!conn.isConnected());
+    delay(500); 
+  }
+  
+  ///Serial.println("Connected...");
+
+  while (conn.isConnected()) {
+     if (conn.available()) {
+       // Serial.print(conn.read(), BYTE);
+       //conn.print(conn.read());
+       Serial.print(conn.read(), BYTE);
+     } 
+     if (Serial.available()) {
+        conn.print(Serial.read()); 
+     }
+  }
+  
+  ///Serial.println("");
+
+  conn.close();
+
+#if 0
 #if 1
 #if 1 //b
@@ -725 +753 @@
   Serial.println("halting");
   while (1) {};
+
+
 
   NetworkConnection conn = Network.connect(209,177,146,34, 6667);  // TODO: Better?
@@ -947 +977 @@
   }
 #endif
-
-
-  Serial.println("End test and dummy loop");
+#endif // a-1
+
+  ///Serial.println("End test and dummy loop");
   while (1) {}  
 /**/